Engine oil ROWE 10W30 HIGHTEC POWER BOAT 4-T 5L
- EAN: 4049339701130
- Model: 10W30 HIGHTEC POWER BOAT 4-T 5L
- Viscosity: 10W30
Show all
- Oil specification: API SM, JASO MA, NMMA FC-W, NMMA FC-W Catalyst Compatible
- Compatible with: all 4-stroke inboard and outboard marine engines
- Volume [Litres]: 5
- Brand category: Premium
- Manufacturer: ROWE
- Manufacturer part number: 20147-0050-99
ROWE HIGHTEC POWER BOAT 4-T 10W-30 is a high-performance mineral-based engine oil developed specifically for four-stroke marine engines. Its formulation is tuned to the unique demands of the water, where engines run hot, under sustained load and in the presence of moisture. The result is dependable lubrication and protection for inboard and outboard power units.
Purpose and specifications
This oil is intended for 4-stroke inboard and outboard boat engines. It meets API SM and JASO MA, and fulfils the marine requirements of NMMA FC-W and NMMA FC-W Catalyst Compatible, making it suitable for engines with and without catalytic aftertreatment. The SAE 10W-30 grade provides a balanced film for typical marine operating conditions.
- 5L container for a complete marine engine oil change
- Easy circulation at start-up with the 10W cold rating, and a stable film at running temperatures around 100 C and above
- Strong protection against wear and corrosion in the humid marine environment, keeping internals clean
- Catalyst-compatible formulation that safeguards exhaust aftertreatment on modern outboards
When to use / change?
Choose this oil for four-stroke marine engines that call for an NMMA FC-W lubricant. Change the oil at the engine maker's service interval, commonly once per season or every 100 operating hours, whichever comes first. The 10W-30 grade suits a broad ambient range of roughly -25 C to +40 C. Stored sealed in a cool, dry place, shelf life is approximately 5 years.
Frequently asked questions
Is this for two-stroke or four-stroke engines?
It is a dedicated four-stroke oil for inboard and outboard engines. Do not use it in two-stroke marine engines.
Is it safe for engines with a catalytic converter?
Yes. It meets NMMA FC-W Catalyst Compatible, so it is suitable for catalyst-equipped outboards.
How often should I change marine oil?
Typically once per season or every 100 hours of use. Follow your engine manual for the exact interval.
Suitable for: all 4-stroke inboard and outboard marine engines. Always verify the exact approval against your vehicle's owner manual before use.
Data sheet
- EAN
- 4049339701130
- Viscosity
- 10W30
- Oil specification
- API SM
JASO MA
NMMA FC-W
NMMA FC-W Catalyst Compatible - Model
- 10W30 HIGHTEC POWER BOAT 4-T 5L
- Volume [L]
- 5
- Brand category
- Premium
- Manufacturer
- ROWE
- Manufacturer part number
- 20147-0050-99
- NMMA FC-W Catalyst Compatible
- 4
Shipping & delivery
We deliver across the European Union. Orders confirmed on business days are prepared and handed to the carrier the same or the next business day.
Delivery methods
Courier delivery to your door, or pickup at parcel lockers and points across our carrier networks.






Delivery time
Usually 1–5 business days, depending on destination and carrier.
Shipping cost
Calculated automatically at checkout by weight and destination. Free shipping may apply above a store-specific order value.
Packaging — built to arrive intact
Oil and lubricants are liquids, so we pack every order to reach you perfectly. This is the care that goes into each parcel:
The result: a clean, sealed, undamaged parcel — because getting the oil to you intact is the whole point.
Returns
14-day right of withdrawal under EU consumer law. Items must be unused and in original, unopened packaging.
Car filters – MANN-FILTER
Time for your car's maintenance? Choose the right filters by make, model and engine – or let our AI search find the filters for your exact vehicle.