Purpose and Specifications

CRC Multi Grease is a lithium-based extreme pressure grease designed for general-purpose lubrication of bearings and moving parts in machinery, garden equipment, and industrial applications. This multipurpose formula protects equipment from rust, wear, and corrosion while handling shock loads and vibrations without breaking down.

Key Performance Features:

• Works reliably from -30°C to +130°C (short-term up to +140°C)
• Resists water washout and maintains protection in wet conditions
• Handles high-pressure applications without shearing or thinning
• Excellent oxidation stability—stays effective longer between reapplications
• Adheres well to bearing surfaces, reducing throw-off during operation

NLGI Grade 2 consistency—thick enough to stay in place, fluid enough to flow where needed.

When to Use / Replace?

Apply CRC Multi Grease to ball bearings, roller bearings, sliding contacts, and joints in machinery that operates under normal to heavy loads. Reapply every 6–12 months depending on operating conditions, temperature, and equipment speed. In high-speed or high-temperature environments (above +100°C), inspect and reapply more frequently—every 3–6 months. For equipment exposed to water or washout conditions, check grease condition monthly and top up as needed.

Replace completely when grease appears discolored, hardened, or contaminated with debris. Clean out old grease with a solvent before reapplying to avoid mixing incompatible lubricants.

Frequently Asked Questions

• Can I use this on car wheel bearings? Yes, CRC Multi Grease is suitable for automotive wheel bearings, CV joints, and suspension components. It handles the temperature swings and load demands of typical vehicle operation.
• Is it safe for food processing equipment? This standard formulation is not food-grade. CRC offers a separate Food Grade Multi-Purpose Grease (NSF H1 registered) for food production environments. Do not substitute.
• How long does a 100 ml tube last? A single 100 ml tube typically lubricates 8–15 bearing points depending on bearing size. For a small machine with 4–6 bearings, one tube covers a full reapplication cycle.